How To Repair A Fujitsu Hard Drive
Archived content
Annotation: this is an archived page and the content is likely to be out of date.
Recovery Process
Recovery Solution | Recovery Process | Frequently Asked Questions on Recovery CD |
For Windows 9x, ME, NT, 2000
LIFEBOOK with built-in CD-ROM
1) Power upwards the LIFEBOOK.
ii) Press F12 to access kick sequence and select CD-ROM as boot device.
OR
Printing F2 to enter BIOS setup and alter boot sequence to CD-ROM.
iii) Insert the Recovery CD into the CD-ROM bulldoze.
4) Select the recovery options.
LIFEBOOK with PCMCIA CD-ROM
one) Connect your Floppy Drive & CD-ROM
*If the model does not come with to a higher place accessories, you may buy them separately.
For optimum performance, Fujitsu accessories is recommended.
two) Power up the LIFEBOOK.
3) Printing F12 to access boot sequence and select Floppy Deejay Drive as boot device.
OR
Press F2 to enter BIOS setup and change boot sequence to Floppy Disk Drive.
iv) Insert the Recovery kick floppy into your floppy drive.
5) Insert the Recovery CD into the CD-ROM bulldoze.
6) Select the recovery options.
DESKPOWER with congenital-in CD-ROM
1) Power up the DESKPOWER.
two) Press F12 to access boot sequence and select CD-ROM as boot device.
OR
Press F2 to enter BIOS setup and change boot sequence to CD-ROM.
3) Insert the Recovery CD into the CD-ROM bulldoze.
four) Select the recovery options.
Note:
- E'er fill-in your important information before perform the recovery.
- Format and recover choice will erase your hard disk content including information files. Cull Recover without format will not erase your hard disk content.
- Do not perform recovery unless the operating system encounter critical errors.
- You may apply Composite/Commuter CD to reinstall device driver or pre-installed program during or afterward the recovery process.
For Windows XP
Reinstall Windows XP from Windows fashion
1) Insert the Recovery CD into the CD-ROM drive when y'all are in Window desktop.
ii) When Recovery program starts, select Perform Recovery to reinstall Windows XP. Follow on-screen instructions to keep.
Note: For LIFEBOOK B and P series, you lot may choose either to run Recovery plan from CD or Hard Disk 2d partition while in Windows fashion.
Reinstall Windows XP by booting from Recovery CD
(for all models except LIFEBOOK B and P serial)
ane) Power upwards the system.
ii) Printing F12 to access kicking sequence and select CD-ROM as boot device.
3) Insert the Recovery CD into the CD-ROM drive.
iv) Select the recovery options.
v) Follow on-screen instructions to proceed.
Warning: If yous desire to preserve your data or program files, practice not attempt to repartition (initialize) or reformat your difficult deejay in Windows setup.
Reinstall Windows XP by booting from Recovery boot floppy
(for LIFEBOOK B and P serial only)
1) Connect your Floppy Drive & CD-ROM
* If the model does not come with to a higher place accessories, you may purchase them separately.
For optimum operation, Fujitsu accessories is recommended.
* PCMCIA CD-ROM is not bootable. Please apply boot floppy as boot device.
2) Ability upwardly the LIFEBOOK.
3) Press F12 to access boot sequence and select Floppy Deejay as boot device.
4) Insert the Recovery kick floppy into your floppy drive.
5) Select the recovery options either from second partition or Recovery CD.
half dozen) Insert the Recovery CD into the CD-ROM drive if you cull to recover from Recovery CD.
Notation:
- Ever backup your important data before perform the recovery.
- Format and recover selection volition erase your hard disk drive content including data files. Choose Recover without format will not erase your difficult disk content.
- Do not perform recovery unless the operating system encounter critical errors.
- You lot may use Composite/Driver CD to reinstall device commuter or pre-installed program during or after the recovery process.
For Windows XP Tablet PC Edition
Reinstall Windows XP from Windows way
1) Insert the Recovery CD into the CD-ROM drive when you are in Window desktop.
two) When Recovery program starts, select Perform Recovery to reinstall Windows XP. Follow on-screen instructions to proceed.
Notation: System without CD-ROM, you may choose to run Recovery program from difficult disk second division while in Windows way.
Reinstall Windows XP by booting from Recovery CD
1) Power upward the system.
two) Press F12 to access kick sequence and select CD-ROM as kicking device.
3) Insert the Recovery CD (XP Tablet PC Edition CD1) into the CD-ROM drive.
four) When "Press any key to boot from CD" appear, press any key on the keyboard inside five seconds.
5) Follow on-screen instructions to continue.
Alert: If you lot want to preserve your information or program files, do not effort to repartition (initialize) or reformat your hard disk in Windows setup.
Reinstall Windows XP by booting from Recovery kick floppy
1) Connect your Floppy Drive & CD-ROM (if available).
ii) Power up the organization.
iii) Press F12 to access boot sequence and select Floppy Disk as boot device.
four) Insert the Recovery kick floppy into your floppy drive.
five) Select the recovery options either from second partition or Recovery CD.
6) Insert the Recovery CD into the CD-ROM drive if you choose to recover from Recovery CD.
Additional notes for system without Tablet Dock
If your arrangement does not come with a Tablet Dock, yous can use either of the following methods to perform recovery.
- Hd second sectionalization
- USB CD-ROM
- PCMCIA CD-ROM
Always uses hard disk second sectionalisation as get-go choice as information technology does non require any additional hardware. Yet, if you does non have a second partition or a Tablet Dock, you may perform recovery using other methods.
Setup Instructions for using Fujitsu USB CD-ROM/RW drive to perform recovery from CD ( for model without a Tablet Dock )
Requirements:
- USB Boot floppy bulldoze
- USB keyboard
- USB CD-ROM
Since ST4110 but has 2 USB ports, only 2 USB devices tin can exist used at once. At initial setup, apply your tablet PC navigation key ( to make choice ) and enter push button to simulate key printing.
- Connect just the USB boot floppy and USB CD-ROM at either ports
- Kicking up system using Tablet PC Recovery
- boot floppy Use navigation push button to select RECOVER USING FUJITSU USB CD-ROM or other USB CDROM
- Press enter Button (ent) at your tablet PC when prompted to press Entere)
- Windows installation continues by copying the filesf)
- Observe when file re-create is going to complete ( at about 95% ), and after copy finish, unplug USB boot floppy immediately and plug in the USB keyboard. From there onwards, use the USB keyboard.
If you take an IR Keyboard
Above step is not necessary if y'all accept an IR keyboard as IR keyboard does non occupy any USB port.
Using other tertiary political party CD-ROM
If y'all accept other third political party CD-ROM, replace your CD-ROM DOS device driver in the following line in config.sys
DEVICE=A:\USBCDROM\USBCD.SYS /D:OEMCD001
How To Repair A Fujitsu Hard Drive,
Source: https://www.fujitsu.com/id/support/products/computing/pc/ap/drivers/recovery-process.html
Posted by: jonesdidepubse.blogspot.com
0 Response to "How To Repair A Fujitsu Hard Drive"
Post a Comment